Hello ~ dear friends, welcome to the beautiful Villa small class. Last period with you to share some products about new building materials, this period we come to understand, in addition to the products mentioned in the last period, new building materials and what.

New building materials four: liquid wallpaper

Decorate the metope with the biggest area in decorating as building, old building materials product is wall paper, emulsii paint. Compared to the old wallpaper:

Liquid wallpaper belongs to waterborne coating, which has strong stain resistance as traditional coating, good moisture resistance and antibacterial properties, and is not easy to insects and not easy to aging.

New building materials five: metal carved board

Or metal insulation board of carve patterns or designs on woodwork absorbed many advantages of modern wall materials both at home and abroad, is a concentration of insulation, decoration, heat insulation, environmental protection, flame retardant, weather resistance, waterproof, antifreeze, sound insulation, seismic, light quality, less land and other multi-function integrated plate, is currently the most popular international selling new lightweight somite can environmental protection building materials.

The plate has brick, spray grain, wood grain, orange peel grain, stripe, cultural stone and other texture finishes and hundreds of colors to choose from, and ensure that the coating will not fade for ten years, the plate specification is: 3000-6000*385*16mm, the standard specification is: 3800*385*16mm, because of the plate body concave and convex buckle slot insertion is very simple, so favored by the majority of users!

First, the energy saving effect is remarkable

1. Aluminized zinc plate with thickness of 0.30mm is adopted for composite plate substrate. The theoretical life of aluminized zinc plate is 50 years, and the recovery rate is 99.9%, which effectively realizes energy reuse.

2. The middle insulation layer is made of high-density rigid foam polyurethane, which is the most advanced thermal insulation material in the world and meets the requirements of environmental protection. At the same time, after testing, the rigid polyurethane foam is used at high temperature for 25 years, its thermal insulation performance decreases by less than 3%, plus the protective effect of the back with aluminum foil paper. More effectively ensure that the wall energy saving system can maintain a stable and good thermal insulation and energy saving effect in a variety of environmental conditions for a long time.

3. The unique design structure of wall energy saving system completely eliminates the phenomenon of "hot and cold bridge". Effectively avoid the occurrence of indoor damp, mildew and other phenomena, to achieve the effect of heat insulation, to achieve the purpose of energy saving and consumption reduction.

Second, the decorative effect is stronger

1. The outer surface layer of the plywood can be pressed into various textures by special process, with diverse realistic patterns and rich colors, which can meet different architectural styles. While beautifying the city, it also greatly improves the taste of buildings and integrates with nature.

2. The surface of the composite plate is made of polyester paint layer and fluorocarbon layer with excellent weather resistance, corrosion resistance, acid and alkali resistance and self-cleaning, which can ensure the aesthetic effect of the building facade for a long time.

3. The unique process structure and technology of the plywood can meet the design requirements of different aesthetic standards and fully bring different levels of visual enjoyment.

Three, the construction is more convenient

1. The plywood installation system adopts dry hanging method for construction, and adopts relevant special accessories. The construction process is simple, and there is no need to carry out tedious pretreatment on the outer surface of the building. Because it is not affected by the seasonal environment, the construction period is greatly shortened.

2. The construction process has no dust, no noise, small space, no production of construction waste, especially in the existing building energy saving transformation on the life and work of the residents do not have any impact.

Four, better cost performance

1. The use of thermal insulation materials, not only to consider the level of thermal conductivity, but also to measure the weight of different thermal insulation materials when reaching the same thermal resistance. The thicker the thermal insulation material, the more inconvenient the construction, the larger the volume, the more the structural load, which indirectly causes the increase in cost. The best combination plate has light weight, reduces the load of the wall structure, and combines with the air layer in the system in a variety of ways to achieve double energy-saving effect, which can effectively meet the energy saving requirements of different areas.

2. The plywood because its surface is the metal surface, long service life, effectively prevent large area of soil and water erosion phenomenon caused by brick, stone, and no subsequent falls off, the drum, the phenomenon such as cracks, less ceramic tile, stone, wall caused by radioactive substances such as environmental pollution, is a safe, environmental protection and green energy saving of the new building materials, long-term benefit of human society.

New building materials six: natural anhydrous plaster

HT anhydrous plaster plaster series products

Anhydrous stucco gypsum is a kind of high efficiency and energy saving, green environmental protection, interior wall plastering construction decoration materials have good physical and operability, without processing interface when using, less ash, landing rendering efficiency, save time, plaster comprehensive cost is low, which can effectively prevent the ash layer empty drum, crack, fall off, has good cost performance, new type building material price access to: Books, telephone, cost through the project cost network and other channels. Can greatly speed up the progress of the project, has been widely welcomed by the community.

Two, 8 features:

The raw material of the product is anhydrite natural material with abundant storage on earth, no need to calcination, low energy consumption, non-toxic and tasteless, environmental protection and safety, which is an excellent green building material.

Strong adhesion, plastering surface smooth, dense, delicate, used in aerated concrete base material effect is more significant, plastering layer will not appear hollow drum cracking phenomenon.

With breathing function, can skillfully control the outdoor humidity within the appropriate range, to create a comfortable working and living environment.

The experiment shows that the product is the ideal fire prevention material, can effectively prevent the spread of flame, fire prevention ability can reach more than 4 hours, with excellent fire performance.

After the construction of the wall can be sound insulation 20-52 decibels, but also a good sound absorbing material.

As interior building decoration materials, the product has good thermal insulation performance.

The use of the product can effectively improve work efficiency, fast condensation hardening, easy to mechanized construction.

Using this product can effectively reduce the overall cost of plastering engineering, with excellent cost performance.

Three, construction technology:

1, the surface of the base wall is uneven and the joint is picked flat or 1:3 cement mortar is used to fill the level treatment.

2, the wall should be sprayed with water before plastering, but there can be no clear water on the surface of the substrate.

Aerated concrete blocks can be sprayed with water one day in advance and poured twice a day to ensure that the water absorption depth is above 10mm.

Concrete hollow cut can be watered one day in advance, to ensure its water absorption concentration in 5mm or so.

Brick wall, cement mortar base material one day in advance, to ensure that the water absorption depth of about 10mm, before construction can be sprayed again wet.

3, in the wall of different substrate connection and wall corner should be pasted glass fiber mesh cloth, lap width from the junction is not less than 100mm.

4, slurry preparation

· Bottom paint plaster: it can be manually mixed or mechanically mixed. The gesso mortar that presses certain glue sand ratio is stirred evenly by the requirement, use immediately.

· Face painting plaster: first add water into the mixing barrel, then add powder to stir, stir evenly, and then use.

· The water used for slurry mixing must be clean drinking water with no impurities.

5. Construction operation

· During construction, the plastering route and sequence should be determined to ensure the continuous operation of the project.

· Standard bars should be set according to the flatness and decoration requirements of the wall base.

· When plastering on relatively flat walls, the plastering thickness is generally about 8mm, which can be completed at one time or layered construction. If the plastering thickness exceeds 8mm due to uneven walls or other requirements, layered construction is carried out. The lower layer should be carried out after the initial setting of the slurry on the upper layer; When the plaster thickness is greater than 35mm, strengthen measures should be taken.

· The pressing of the bottom slurry should be carried out before the final setting (the site is pressed with your finger, slightly dry and hard, but can still press out the fingerprint), and the scraping ruler should be pressed close to the title, up and down, left and right, and then plastered for pressing.

· The cover shall be finished after the final setting of the underlying plaster, and the thickness is generally 2-3mm, which can be completed at one time. Surface calendering is carried out before final setting.

· It is not suitable to recycle the slurry cleaned during plastering and scraped or rubbed off during dressing.

Four, notes:

· The construction temperature of anhydrous plaster plaster shall be controlled in 0-40 degrees Celsius.

· It is not suitable to add water to the condensed slurry.

· In winter construction, the slurry must be used without condensation.

· It should not be used outside the wall or in the environment where it often comes into contact with open water.

· Avoid plastering in the environment where the temperature of the wall changes violently (such as the direct exposure of sunlight to the construction wall in summer)

· Transportation and storage requirements: sun protection and moisture proof. Shelf life: 6 months

The above is beautiful villa on the introduction of new building materials, interested friends can call details oh! Hotline: 400-090-6070.